Sosystem® sorbing systems for industrial and waste water cleaning from emulsified oil products, for leakage repairs in the industrial sector and for oil outflow
Sosystem® sorbing systems are an innovative product designed for wastewater treatment (LWTF), oil outflow response (OOR), and the repair of oil and petroleum product leaks in industrial plants.
SoSystem® is based on a bulk fibrous material in the form of a web fashioned into a single, corrugated structure of hydrophobic polymer fibres bonded together. They have a longer service life than other known sorbents.
The effectiveness of using SoSystem® sorbing systems has been confirmed by tests conducted at universities such as the National University of Oil and Gas “Gubkin University” and the Maritime State University named after Admiral G.I. Nevelskiy.
SoSystem® is supplied both in the form of nonwoven rolled linen, booms, mats, napkins, cassettes and as filter bags.
SoSystem® sorbing systems are environmentally friendly, do not emit toxic substances, do not harm the human body by direct contact and do not require additional safety measures when being used.
Varieties of material
Description: fibrous material made in the form of a cloth formed into a single bulk corrugated structure of hydrophobic polymerfibers bonded together.
Composition: 50% polyester and 50% polypropylene.
Characteristics:
- Thickness:
- 25±3 mm
- Surface density:
- 500+25, g/m2
- Irregularity in mass not over:
- not over 8%
- Oil capacity in filtration mode:
- 4,71 kg/kg
- Number of cycles of regeneration by squeezing:
- 500 cycles
- Oil recovery in squeezing:
- 89 %
Application: a filtering load for the purification of industrial and wastewater from emulsified oil products.
Description: high quality polyesterfiber, which gone through several stages of preparation, with high quality water pu rification capacity.
Composition: polyester.
Characteristics:
Loose density: 800 g/m2
Application: a filtering load for the purification of industrial and wastewater from solid particles.
Description: high-quality polypropylene fiber, gone through several stages of preparation, with excellent hygroscopicity and low density, which enables perfectlyabsorbingoil products.
Composition: 100% polypropylene.
Characteristics:
Loose density: 800 g/m2
Application: a filtering load for industrial and wastewater from emulsified oil products.
Description: volume fibrous material made in the form of a cloth formed into . a single bulk corrugated structure of hydrophobic polymer fibers bonded together.
Composition: 100% synthetic fibers
Characteristics:
- Thickness:
- 20 mm
- Surface density:
- 250 g/m2
Application: in a filtering load for the purification of industrial and wastewater from solid particles.
Description: volume fibrous material made' In the form ofa cloth formed into L a single bulk corrugated structure of hydrophobic polymer fibers bonded, together.
Composition: 100% synthetic fibers.
Characteristics:
- Thickness:
- 50 mm
- Surface density:
- 500 g/m2
Application: in a filtering load for the purification of industrial and wastewaterfrom solid pa rticles.
Description: activated coal is a porous material consisting mainly of carbon. It has a highly developed overall porosity, a wide range of pores and a significant amount ofspecific absorbing surface.
Composition: black grains without mechanical impurities.
| Characteristics | GOST 6217-74 | Analysis data |
|---|---|---|
| Iodine adsorption activity | not less than 60% | not less than 60% |
| Total volume of pores on the water | not less than 1,6 cm3/g | not less than 1,6 cm3/g |
| Loose density | not over 240 g/dm2 | not over 235 g/dm2 |
| Fraction composition, weight fraction on sieve with canvas: | ||
| № 36 | not over 2,4% | not over 2,3% |
| № 10 | not less than 95,5% | not less than 1,9% |
| On tray | not over 2,0% | not over 1,9% |
| Weight fraction of the zone | not over 6% | not over 5% |
| Weight fraction of moisture | not over 10% | not over 9% |
Application: cleaning of liquid media from a wide range of impurities (from small, commensurate with iodine molecules, to molecules of fats, oils, petroleum products, organochlorine compounds, etc.), with a durable service life.
Description: oil absorbing pads for daily use in case ofemergency elimination of oil leaks, oil pollution and oil product spills.
Composition: polypropylene.
Characteristics:
- Oil capacity (ρ = 0,89 - 0,98 g/cm3):
- 21,88 kg/kg
- Oil adsorption capacity (ρ = 0,89 - 0,98 g/cm3):
- 19,34 kg/kg
- Thickness:
- 2 mm
- Quantity in a packing:
- 100 pcs
- Dimensions:
- 400х500 mm
Application: absorption of various oils and oil products, including paints and other soluble chemicals. Perfectly removes drips and drops on yourworktable.
Description: oil absorbing pillows for collecting oil and oil products in a confined space, as well as nearsources ofconstantlydripping machine oil.
Composition: polypropylene.
Characteristics:
- Oil capacity (ρ = 0,89 - 0,98 g/cm3), kg/kg:
- 9,26
- Oil adsorption capacity (ρ = 0,89 - 0,98 g/cm3), kg/kg:
- 9,05
Application: absorption of various machine oils and petroleum products, including paints and other soluble chemicals.
Description: Description: volume fibrous material made in the form ofa cloth formed into a single bulk corrugated structure of hydrophobic polymer fibers bonded together.
Composition: 100% polypropylene.
Characteristics:
- Thickness:
- 25±3 mm
- Surface density:
- 500+25, g/m2
- Irregularity in mass:
- not over 8 %
- Oil capacity in filtration mode:
- 4,71 кг/кг
- Number of cycles of regeneration by squeezing:
- 500 cycles
- Oil recovery in squeezing:
- 89 %
Application: to collect crude oil and oil products from the surface of water and soil in case of accidental spills.
Description: an oil absorbing boom for gathering oil and oiI-containing products. Does not absorb water. Floats up even after it is filled with oil products, durable outer sleeve. Particular capillary properties: the process of absorption begins right after contact with spilled liquid. The flexibility of the material makes it possible to place the boom around equipment ofany shape, both on water and on land. Adjustable in length.
Composition: 100% polypropylene.
Characteristics:
- Oil capacity (ρ = 0,89 - 0,98 g/cm3):
- 9,26 kg/kg
- Oil adsorption capacity (ρ = 0,89 - 0,98 g/cm3):
- 9,05 kg/kg
- Dimensions diameter:
- diameter 13 cm, length 3 m
- Quantity in a packing:
- 4 pcs. in a set
Application: localization ofoil spills on the surface of land and water.
Description: Description: volume fibrous material made in the form ofa cloth formed into a single bulk corrugated structure of hydrophobic polymer fibers bonded together.
Composition: 100% polypropylene.
Characteristics:
- Thickness:
- 25±3 mm
- Surface density:
- 500+25, g/m2
- Irregularity in mass:
- not over 8 %
- Oil capacity in filtration mode:
- 4,71 кг/кг
- Number of cycles of regeneration by squeezing:
- 500 cycles
- Oil recovery in squeezing:
- 89 %
Application: to collect crude oil and oil products from the surface of water and soil in case of accidental spills.
Description: an oil absorbing boom for gathering oil and oiI-containing products. Does not absorb water. Floats up even after it is filled with oil products, durable outer sleeve. Particular capillary properties: the process of absorption begins right after contact with spilled liquid. The flexibility of the material makes it possible to place the boom around equipment ofany shape, both on water and on land. Adjustable in length.
Composition: 100% polypropylene.
Characteristics:
- Oil capacity (ρ = 0,89 - 0,98 g/cm3):
- 9,26 kg/kg
- Oil adsorption capacity (ρ = 0,89 - 0,98 g/cm3):
- 9,05 kg/kg
- Dimensions diameter:
- diameter 13 cm, length 3 m
- Quantity in a packing:
- 4 pcs. in a set
Application: localization ofoil spills on the surface of land and water.
Description: Sorbing mat. It is made of a hydrophobic sorbing cloth with a dacron metallized film
Composition: polypropylene + dacron metallized film
Characteristics:
- Thickness:
- 25 ± 3 mm
- Areal density:
- 500 + 25 & nbsp; g/m 2
- Roughness by weight:
- no more than 8%
- Oil capacity in filtration mode:
- 4.71 kg/kg
- Number of spin regeneration cycles:
- 500 cycles
- Oil recovery during extraction:
- 89 & nbsp;%